Aleksandar Božović (2024-06-21) reports 165–180 MB/s as a combined read/write copy average. Drives, RAID, and client are unnamed. 22.5 W is not a meter reading. Virtualization Station/H.265 claims are not adopted.
Test setup, measurements & limitations
QNAP TS-433 – NAS po meri najvećeg broja kućnih korisnika
Tested: TS-433 4GB non-expandable. QTS 5 build unnamed. Copy average 165–180 MB/s for read and write together. Drive models, RAID, client NIC, switch, and file size unknown.
Applies to: Exact 4GB soldered SKU class. Not a controlled lab. Do not adopt Virtualization Station as proven or 22.5 W as metered.
- Author reports a 165–180 MB/s average for reading and writing, about 50% above gigabit NAS, without splitting read vs write or naming the array.Source location: Performance paragraph
- Typical working mode 22.5 W is stated without an instrument; official typical is 22.54 W — do not treat as a meter reading.Source location: Power sentence
- Virtualization Station/Container Station and H.265 4K transcode claims are not evidenced in this test and are not adopted.Source location: Software/conclusion
Measurements reported by the reviewer| Measurement | Result | Conditions & source location |
|---|
| Copy average (combined read and write) | 165–180 MB/s | Drives, RAID, client, switch, file size unknownProsek od 165-180 MB/s |
|---|
Limits to keep in mind
- Need to Know IT is spec synthesis, not this experiment
- CPU fanless wording must not be read as a fanless NAS